Menu
Weichai fan belt 81500060228 for engine accessory-drive repair enquiries.
Weichai fan belt 81500060228 is a V-belt reference for engine accessory-drive repair enquiries. Supplier information associates this number with WD615/WP10 applications and an AV13×1125 reference specification. Confirm the original belt markings, engine variant, pulley profile and belt route before ordering. The engine-family name alone does not establish fitment.
Part identification | Specifications | Repair checks | B2B ordering | FAQ
The Createk product reference lists 81500060228 and AV13×1125 for WD615/WP10 Euro II. Its product heading describes an alternator belt. The Carmarge exact-number listing names 81500060228 as an AV13×1125La belt. These references help identify the belt; they do not confirm every engine configuration.
Fan belt and V-belt are useful enquiry terms, but the driven accessory depends on the engine’s belt arrangement. Match the actual drive route and pulley profile. Do not replace this V-belt with a multi-rib PK belt based only on similar length. The main image is an edited supplier photograph showing two reference belts; it does not establish a two-piece sales pack.
| Specification | Reference / purchasing requirement |
|---|---|
| Product name | Engine fan belt / accessory-drive V-belt |
| Part reference | 81500060228 |
| Catalogue size reference | AV13×1125; verify the offered belt’s complete marking |
| Engine references | WD615 / WP10 in cited supplier information; confirm the exact application |
| Length designation | Check the marked length basis, such as La or Li; do not assume identical numbers mean identical lengths |
| Belt profile | Match the V-section, width and required belt construction to the pulley arrangement |
| Drive arrangement | Confirm belt routing, pulley alignment and the correct belt specification |
| Order contents | Individual belt quantity or a separately confirmed matched set; accessories as quoted |
Cracks, fraying, glazing, unusual noise or slipping can prompt a belt-drive inspection. A qualified workshop should check the belt together with its pulleys, alignment and tensioning arrangement. Replacing a belt alone will not resolve an unrelated seized accessory, damaged pulley or alignment fault.
Read the old belt’s markings before selecting a replacement. Compare the required section and length designation with the supplier’s offered belt. A worn or stretched old belt can give misleading measurements, so use the engine specification and catalogue reference when available.
Follow the engine’s service procedure for removal, routing and tension setting. Inspect pulley grooves and correct the cause of abnormal wear before fitting the new belt. For drives that require matched belts, confirm the service requirements and order the specified set together. After installation, check tracking and tension according to the applicable procedure.
Fleet workshops, engine service businesses and parts distributors can prepare an enquiry with:
Specify whether the enquiry is for individual belts or a matched set. Confirm the offered marking, construction, inspection information and package quantity in the quotation. Stock, price, minimum order quantity, lead time and warranty depend on the offer. Other belt numbers and similar catalogue sizes require separate verification.
Request a fan belt quotation with your engine and belt details. Browse WD615 / WD618 parts or WP10 / WP12 parts for related repair enquiries.
Supplier references identify a V-belt used in engine accessory-drive enquiries. Verify the exact engine and drive arrangement.
Universal fitment is not stated. Confirm the engine variant, original belt reference, profile, length marking and routing.
Do not assume interchangeability. Match the belt section and pulley arrangement to the engine specification.
It is a catalogue reference. Confirm the complete size marking, length designation and required construction before ordering.
The photograph does not define package quantity. Request the required individual quantity or a separately confirmed matched set.
Include the part number, engine model or serial number, quantity required, and destination country. Clear photographs of the engine nameplate and the old part can help explain what you need.
Use the engine series to browse the catalogue, then confirm the exact part number and engine details before ordering. A category listing alone does not establish that every listed part fits every engine in that series.
Include clear photographs of any markings on the old part and the engine nameplate with your enquiry. Describe the component you need and provide any available engine model or serial-number information.
Browse Weichai Deutz 226B parts, WD615 / WD618 parts, or WP10 / WP12 parts. You can also visit the full product catalogue.
Click ASK FOR A QUOTE on this page to open the enquiry form. Enter your email address and the details of the parts required. If you include a phone number, add its country code. You can also use our contact page.
China Weichai Engine Parts Distributor
